CALL TO SCHEDULE 206-202-9499 | 425-406-3050



Winter weather in Seattle is cold and wet and at times like this. Seattle residents rely on their heating system to feel comfortable wherever they are in their homes. It is more than annoying to waking up to a cold house because the gas furnace is broken when you expect your furnace is working efficiently.


Beyond feeling uncomfortable when the weather is frosty, a broken furnace can be risky for your home. There is the possibility of water pipes bursting, mold build up and several other problems, which need immediate attention from an expert gas furnace service in Seattle.


Basic things to check


Gas furnaces are very efficient. Although the modern versions are more complicated than the old gas furnaces. Before calling a gas furnace service in Seattle, there are some things you can do yourself.


gas furnace service

1. Power

Check if your gas furnace is getting power by looking into your fuse box. Also see if there are tripped circuit breakers. See if the power switch is set to “ON.” Replace the fuse if it is burnt and blackened. Do note that a blown fuse could be a sign that there is a bigger problem that a gas furnace service in Seattle can easily determine.


2. Inspect air intake and exhaust

If the power checks out, look outside to ensure there are no things that block the fresh air intake and exhaust of the furnace. Newer gas furnaces have their fresh air intakes and exhausts running through the side of the house. In some cases, issues with moisture, insects, leaves and grasses can block them.


3. Check the thermostat

See to it that the thermostat setting is set to ”heat”. And also the temperature setting is high enough to trigger the furnace to turn on. If you have a programmable thermostat, refer to its manual to ensure that you have the correct setting. Likewise, see to it that the thermostat battery is not dead. Replace the battery immediately when the ”low battery” warning is flashing.


4. Check the air filter

If the gas furnace is on, but it is blowing harder than normal, the air filter could be dirty and blocked up. Turn off the gas furnace and replace the filter. Normally, it should be replaced every three months.


When to call a gas furnace service in Seattle


If you have checked all the basic things and the gas furnace would not start, you need to call a licensed technician from an expert gas furnace service in Seattle. The complex set up of newer gas furnaces requires the expertise of a qualified technician from a reputable gas furnace service in Seattle.


One of the best ways to keep your gas furnace in your WA home working reliably and efficiently is to have it regularly checked by a licensed gas furnace service in Seattle. Fischer Heating has been serving homes in Seattle, Washington for more than 35 years and has gained the trust of many homeowners.


As a qualified gas furnace service in Seattle, Fischer Heating can provide various heating services. And know from installation to repair to maintenance services. The friendly, knowledgeable and licensed technicians of Fischer Heating can give you advice, tips and suggestions for basic gas furnace maintenance. They are qualified to repair and maintain various types and models of old and modern gas furnaces in homes around Seattle.


See to it that your gas furnace is regularly serviced. Like all appliances and machinery, regular maintenance prolongs their life. Before you incur higher repair costs or worse, replace your gas furnace. Call an expert from Fischer Heating, the prime gas furnace service in Seattle. Do not wait until you get cold and uncomfortable during the wet and chilly winter days before you have your gas furnace checked. Have its maintenance done right. Call Fischer Heating at 206-279-3322.

CONTACT US FOR Gas Furnace Service in Seattle